Move the Seat to the rearrnost portion and apply spray greasing to the portion shown at the right once every 3 months.11. PERIODIC INSPECTION TABLE
The items listed below require periodic check and maintenanceto retain the performance of this machine and to ensure safe businessoperation.
Be sure to check once a year to see if Power Cords are damaged, the plug is securely inserted, dust is accumulated between the Socket Outlet and the Power Plug, etc. Using the product with dust as is accumulated can cause a fire or electric shock. Periodically once a year, request the place of contact hereinstated or the Distributor, etc. where the product was purchasedfrom, as regards the interior cleaning. Using the product withdust as is accumulated in the interior without cleaning can causea fire or accident. Note that cleaning the interior parts canbe performed on a pay-basis.
| ITEMS | DESCRIPTION | PERIOD | REFERENCE |
| HANDLE MECHA | Check lamp | Monthly | 3 |
| Check VOLUME VALUE | Monthly | 3 | |
| Check ADJUST GEAR engagement | Tri-monthly | 5-1 | |
| Gear part greasing | Tri-monthly | 5-2 | |
| ACCEL. & BRAKE | Check VOLUME VALUE | Monthly | 3 |
| Check ADJUST GEAR engagement | Tri-monthly | 7-1 | |
| Gear part and bearing greasing | Tri-monthly | 7-2 | |
| SHIFT LEVER | Check SW | Monthly | 3 |
| Greasing | Tri-monthly | 6 | |
| COIN CHUTE TOWER | Check Coin SWs | Monthly | 3 |
| COIN SELECTOR cleansing | Tri-monthly | 8 | |
| MONITOR | Check adjustments | Monthly | 8 |
| MONITORS | Antistatic measures | Weekly | 9 |
| GAME BD | MEMORY TEST | Monthly | 3 |
| Check settings | Monthly | 3 | |
| INTERIOR | Cleaning | Anually | See above |
| POWER SUPPLY PLUG | Inspection and cleaning | ||
| REAR CABINET | Grease the Seat Rail portion | Tri-monthly | This page (see below) |
| CABINET SURFACES | Cleaning | As occasion arises |
REAR CABINET (Greasing the Seat Rail Portion)
Move the Seat to the rearrnost portion and apply spray greasing to the portion shown at the right once every 3 months.
After greasing, move the Seat a few times forward and backwardso as to allow the grease to be applied all over uniformly. Besure to wipe off excess grease which comes in contact with therubber on the seat rail, or any other surfaces.
CLEANING THE CABINET SURFACES
If the Cabinet is badly stained, use a cloth which is dippedin the chemical detergent liquid diluted with water and then squeezeddry. Do not use such solvents as alcohol, thinner, benzene, etc.,or abrasives, bleaching agents and or chemical dustcloth as thesecan damage cabinet surface finish.