SECURING IN PLACE (LEG ADJUSTERS)
Make sure that all of the leg adjusters are in contact with the floor. If they are not, the machine may move and cause an accident.When assembling, be sure to perform the work by plural personsto avoid the risk of injury or damage to the machine.
This machine has eight casters and eight leg adjusters. When the installation position is determined, cause the leg adjusters to come into contact with the floor, and make adjustments so that the casters are raised approximately 5mm off the ground and that the machine is level.
Move the machine to the installation position. When installingthe machine against or close to a wall, be sure to secure a sufficientpassage space.
Attach the joint plate for the two internal leg adjusters asshown. First, cause the other six leg adjusters to come in contactwith the floor. Make adjustments with a wrench to ensure thatthe machine's position is level.
After making adjustments, fasten the leg adjuster nut upwardsand secure the height of the leg adjusters.
Provide sufficient space so as to allow for ventilation bythe ventilation fan.