[Table of Contents] [Previous Page] [Next Page]

The Remote Controller has 2 different types. Depending on the specific type, the adjustment procedure varies.

In the case of Remote Controller (Part No. 200-5297):

If the Convergence adjustment is incorrect, a red or blue line may appear to move when a Remote Control Numeral Key is pressed after the cross pattern appears. If the line is superimposed on the green cross pattern, the cross pattern becomes white.

  1. Make sure that the slide portion of the Remote Control is positioned as per (1) above.
  2. Press BS 1.
  3. Position the slide portion of the Remote Control to (3) in the above Figure.
  4. Press VIDEO 1.
  5. Position the Remote Control's slide portion to the above (5).
  6. Press " + " to have the cross pattern appear.
  7. Use the remote controller to make static adjustment.

    Remote control [ 2 ] , [ 5 ] .... Causes the red horizontal line to match with the green horizontal line.
    Remote control [ 4 ] , [ 6 ] .... Causes the red vertical line to match with with green vertical line.
    Remote control [ 8 ] , [11] .... Causes the blue horizontal line to match match the green horizontal line.
    Remote control [10] , [12] .... Causes the blue vertical line to match with the green vertical line.

  8. Position the Remote Control's slide portion to (3) in the above Figure and push "OFF" 5 times to return to the normal mode.