In the case of Remote Controller (Part No. 200-5410)
If the Convergence adjustment is incorrect, a red or
blue line may appear to move when a Remote Control Numeral Key
is pressed after the cross pattern appears. If the line is superimposed
on the green cross pattern, the cross pattern becomes white.
(1) Have the Remote Controller face the Projector screen and
press Key 1, 2, and 3 (Portion (1) shown) for Static Convergence
Adjustment sequentially in order, causing the cross pattern to
be displayed.
(2) Press the following arrow keys (Portion (2) shown) to make
adjustments.
(3) Press the CANCEL Key (Portion (3) shown) 5 times. This
operation allows for returning to the
original screen and at the same time storing the adjustment data.