Method of V. R. adjustment
- Loosen the 2 screws which secure the V. R. Bracket and move
the V. R. Bracket to disengage the gears.
- Have the V. R. value match with the value obtained when the
pedal is released.
- Mesh the gears to secure the V. R. Bracket. At this time,
be sure to obtain an appropriate backlash.
- Step on the pedal and check V. R. value variations. If the
value is not within the above appropriate range, loosen the 2
screws which secure the ADJUST GEAR to make an adjustment.
11 - 2 GREASING
Apply greasing to the gear and shaft portions once every 3
months.
Apply greasing in the following procedure:
- Remove the 4 Tamperproof Screws (black) which secure the
Pedal Cover and remove the Pedal Cover by moving it forward.
- Remove the Pedal Shaft from the lower portions of ACCEL.
pedal and BRAKE pedal. At this time, ensure that the ACCEL pedal
and BRAKE pedal are firmly secured as they are subjected to torsion
spring force.
- After applying greasing to each part, assemble in the procedure
opposite as when disassembling.
