[Table of Contents] [Previous Page] [Next Page]

Method of V. R. adjustment

  1. Loosen the 2 screws which secure the V. R. BRACKET, move the V. R. BRACKET and detach the gears.

  2. Adjust the V. R. so that it is consistent with the value near the centering position.

  3. Cause the gears to be engaged and secure the V. R. BRACKET. At this time, make sure that an appropriate backlash is obtained.

  4. If the V. R. value is not appropriate when the steering wheel is at the centering position, loosen the 2 screws which secure the V. R. gear, turn the gear holder to make a fine adjustment so that the V. R. value is within the allowable range.

  5. Check the V. R. value variations by turning the handle.


9-2 GREASING

Once every 3 months, grease the gears, bearings, springs, and cam & arm's sliding portions.