Selecting the INPUT TEST on the test mode menu screen causes
the screen (on which each switch and V. R. are tested) to be displayed.
Press each switch. For the coin switch test, insert a coin from
the coin inlet with the coin chute door being open. If the display
beside each switch indicates "ON," the switch and wiring
connections are satisfactory.
Ascertain the display of V. R. value for the steering wheel and
accelerator & brake. If the V. R. values are not satisfactory,
refer to Sections 9 & 10.
In the TEST mode menu, selecting OUTPUT TEST allows the screen
(on which the projector is tested) to be displayed. Although the
projector adjustments have been made at the time of shipment from
the factory, color deviation, etc., may occur due to the affection
caused by geomagnetism, the location building's steel frames and
other game machines in the periphery. By watching the test mode
screen, make judgment as to whether an adjustment is needed. If
it is necessary, adjust the projector by referring to Section
13.
In the LAMP TEST mode, carry out the lamp test to ascertain that
each lamp lights up satisfactorily.
In the TEST mode, selecting SOUND TEST causes the screen (on
which sound related BD and wiring connections are tested) to be
displayed. BGM (background music) is emitted from the tweeter
speakers (a round type), one each on both sides (right/left) of
the control panel and also from the rear speakers (a square type),
one each on both sides (right/left) behind the seat. Other sounds
(announcement and sound effects) are emitted from the front speakers
(a square type), one each on both sides (right/left) of the control
panel and also from the superwoofer. Be sure to check if the sound
is satisfactorily emitted from each speaker and the sound volume
is appropriate.
Perform the above inspections also at the time of monthly inspection.