[Table of Contents] [Previous Page] [Next Page]

7. SECURING TO THE INSTALLATION POSITION (LEG ADJUSTER ADJUSTMENT)

WARNING!
Make sure that all of the leg adjusters are in contact with the floor. If they are not, the cabinet may move and cause an accident to occur.

This machine has twelve casters (four each for the front cabinet, the rear cabinet and the PTV) and ten leg adjusters (two for the front cabinet, four for the rear cabinet and four for the PTV) (Fig. 6.12). When the installation position is determined, cause the leg adjusters to come into contact with the floor directly, make adjustments in a manner so that the casters will be raised approximately 5 mm. from the floor and make sure that the machine position is level.


FIG. 6.12 BOTTOM VIEW

  1. Move the machine to the installation position. When installing the machine against or close to a wall, be sure to secure a passage space to enable the player to take a ride in the machine.

  2. Cause all of the leg adjusters to make contact with the floor. By using a wrench, make adjustments in the height of the leg adjusters to ensure that the machine's position is level.

  3. After making adjustments, fasten the leg adjuster nut upward and secure the height of the leg adjuster (Fig. 6. 13).


FIG. 6.13 LEG ADJUSTER

Machine movement

Since this machine is a heavy structure of approximately 375kg., its leg adjusters should be retracted when moving the machine over the floor.
Where the floor changes in level, be sure to separate the front cabinet and rear cabinet from each other. If the mechanism base is lifted with the front and rear portions still connected, the cabinet can be damaged.