---

[Table of Contents] [Previous Page] [Next Page]

---

6. PRECAUTIONS TO BE HEEDED WHEN ASSEMBLING AND MOVING THE MACHINE

WARNING:

1. Perform the assembly work by following the procedure herein stated. Failing to comply with the instructions, for example, inserting the plug into an outlet at the stage not mentioned in this manual might cause an electric shock accident.
   
   
2. Assembling should be performed as per this manual. Since this is a complex machine, erroneous assembling may cause damage to the machine, or malfunctioning to occur.
   
   
3. When assembling, be sure to perform the work by plural persons.

When carrying out the assembly work, follow the procedure in the following 7-item sequence:

1. ASSEMBLING THE PTV
2. ASSEMBLING THE CABINET
3. CONNECTING THE CABINET AND PTV
4. POWER SUPPLY, AND EARTH CONNECTION
5. TURNING THE POWER ON
6. ASSEMBLY CHECK
7. SECURING TO THE INSTALLATION POSITION (LEG ADJUSTER ADJUSTMENT)

Before starting assembly work, check to see if the parts, screws, etc. mentioned in the following Table are all available. Also, note that the master key (an accessory) in addition to the tools such as a plus screwdriver, wrench for M18 hexagon bolt and socket wrench is required for the assembling work.

TABLE 6.1 PARTS LIST