Even when the REJECT button is pressed, if the coin is not
rejected open the coin chute door and open the selector gate.
After removing the jammed coin, put a normal coin in and check
to see that the selector correctly functions.
1) Turn the power for the machine OFF. Open the coin chute
door.
2) Open the gate and dust off by using a soft brush (made of wool
etc.).
3) Remove stain by wiping with a soft cloth which contains water
or chemicals detergent
4) Remove the CRADLE. When removing the retaining ring (E ring),
be very careful so as not to bend the shaft.
5) Remove stain from the shaft and pillow portions by wiping off
with a soft cloth, etc.
6) After wiping off as per 5 above, further apply a dry cloth,
etc. to cause the coin selector to dry completely.
NOTE (FIG. 29.2):
Absolutely do not apply machine oil, etc. to the coin selector.
After cleaning the coin selector, insert a regular coin in the
normal working status and ascertain that the selector correctly
functions.