16. PROJECTOR
Since the Projector has been adjusted at the time of shipment, avoid making further adjustments without good reason.
The Projector is subject to color deviation due to Convergence deviation caused by the geomagnetism at the installation location and peripheral magnetic field. After the installation of machine, and before commencing operation, check for Convergence deviation and if deviated, make adjustments.
16-1 CLEANING THE FRONT GLASS
Use care when handling glass made parts. When the glass is damaged, fragments of glass can cause injury.
Use alcohol based cleaner (liquid). Use a soft cloth. When removing an attached large particle of dust (or foreign matter), do not rub with a cloth.
Clean the screen once a week. Use a soft, clean cloth and GLASS CLEANER to remove stains. To avoid damaging the screen and cabinet surfaces, only the use of GLASS CLEANER is allowed. Do not use such solvents as thinner, alcohol, etc., or abrasives and/or bleaching agents. The screen is made of glass. Do not rub with hard items, dust with excessive force, or perform any similar acts. If stains cannot be removed, ask professional service personnel for assistance.