3) SECURING IN PLACE (LEG ADJUSTER ADJUSTMENT)
Make sure that all of the leg adjusters are in contact with the floor. If they are not, the cabinet may move, causing an accident.
This machine has 8 casters (4 for the Front Cabinet, 4 forthe Rear Cabinet) and 10 leg adjusters (4 for the Front Cabinet,6 for the Rear Cabinet). (Fig. 6.3a) When the installation positionis determined, causing the leg adjusters to come into contactwith the floor directly, make adjustments in a manner so thatthe casters will be raised approximately 5mm. from the floor andmake sure that the machine position is level.
1. Move the machine to the installation position. To ensurethe safe operation of the product, provide sufficient space byadequately keeping the product away from wall surfaces and othercabinets.
2. Have all of the Leg Adjusters make contact with the floorsurfaces. Adjust the height of the Leg Adjusters by using a wrenchin the manner so that the machine position is kept level.
3. After making adjustments, fasten the leg adjuster nut upwardand secure the height of the leg adjuster. (Fig. 6.3b)
