In the case of Remote Controller (Part No. 200-5410)
If Convergence Adjustment is deviated. after the crosshatch
pattern appears, the cross pattern will not be white, with red
or blue color being blurred from the lines. In this case, move
the red or blue line by operating the Remote Controller. When
the line is superimposed on he reference line (green) to avoid
blurring, the cross lines will become white.
(1) Have the Remote Controller face the Projector screen and
press Key 1, 2, and 3 (Portion (1) shown) for Static Convergence
Adjustment sequentially in order, causing the cross pattern to
be displayed.
(2) Press the following arrow keys (Portion (2) shown) to make
adjustments.
(3) Press the CANCEL Key (Portion (3) shown) 5 times. This
operation allows for returning to the
original screen and at the same time storing the adjustment data.