CRUTCH
Performs brake mechanism functioning check. Setting change causes the brake to function as follows:
FREE: Unlocked
BRAKE: Locked
CENTERING
Performs Slide (Centering) Motor functioning check. Setting change causes the motor to function as follows:
FREE: Motor centering is canceled.
MOTOR: Executes centering.
EXIT
Returns the OUTPUT TEST menu mode to the screen.
Changing to "BRAKE" from "CRUTCH" secures the bike body. Therefore, even if "CENTERING" setting is changed, the bike will not move. With the bike inclined, changing to "BRAKE" from secures the bike in the inclined status. For motor checking, change "CENTERING" setting with "CRUTCH" set to "FREE." With "CENTERING;" set to "FREE," the bike can easily be inclined as there will be no load in the direction of centering. The inclined bike performs centering gradually via SUB- CENTERING MECHANISM. Setting to "MOTOR" allows for centering by motor.
STOP: IMPORTANT!
Only during motor test, use the START button for moving the arrow and SHIFT-UP/DOWN for CRUTCH and CENTERING setting changes.
Selecting LAMP TEST in the OUTPUT TEST menu mode displays the screen on which each lamp's functioning check is performed.
If the lamp selected (where the arrow is) flashes, the lamp and its wiring connections are satisfactory.
Press either the TEST button or the START button to return the OUTPUT TEST menu mode to the screen.