Assembling should be performed as per this manual.
Since this is a complex machine, erroneous assembling may cause
damage to the machine, or malfunctioning to occur.4 . ASSEMBLING AND INSTALLATION
Assembling should be performed as per this manual.
Since this is a complex machine, erroneous assembling may cause
damage to the machine, or malfunctioning to occur.
When assembling, be sure to perform work by plural persons.
Depending on the assembly work, there are some cases in which performing the work by a single person can cause personal injury or parts damage.
When installing the billboard, it is difficult to carry out work by one person. To perform work properly and safely, be sure work is performed by at least two people.
Note that the tools such as a phillips screwdriver and wrench for M16 hexagon bolt w/24 mm width across flats are required for the assembly work.
When carrying out the assembly work, follow the procedure in the following 6-item sequence:
3. SECURING IN PLACE (ADJUSTER ADJUSTMENT)
To perform work safely and securely, be sure to prepare a step which is in a secure and stable condition. Not using a step or using an unstable step can cause a violent falling down accident.