INPUT TEST
This test displays the state of each switch or button and the
value of each control, and allows each switch, button, and control
to be individually tested.
- Operate each control (steering wheel, gas pedal, and brake
pedal). If the values shown range as listed in Table 7, the control
is operating satisfactorily.
- Press each switch or button. If the indicator goes ON when
the button is activated, the button is operating and the wiring
connections are satisfactory.
- To check Coin Chutes #1 and #2, open the Coin Chute Door
and insert a coin in the slot.
- Push the Test Button (or the Start and View Change Buttons
simultaneously) to return to the Test Menu.
Table 7: CONTROL VALUE RANGES
|
CONTROL |
POSITION |
VALUE RANGE |
| Steering Wheel |
Left |
Under 2DH |
| Right |
7DH to 83H |
| Centered |
Over D3H |
| Gas Pedal |
Released |
Under 30H |
| Pressed Down |
Over C0H |
| Brake Pedal |
Released |
Under 30H |
| Pressed Down |
Over C0H |