ADJUSTING THE V. R.
- By using the Spanner, loosen the 2 screws which secure the
V.R. Bracket, move the V.R. Bracket and disengage the gear mesh.
- Ensure that the V. R. value is within the range of the centering
position.
- Mesh the gears to secure the V. R. Bracket. At this time,
ensure that an appropriate backlash is obtained.
- When the Steering Wheel is in the centering position, if
the V.R. value is not appropriate, make fine adjustments by loosening
the 2 screws which secure the V. R. gear, turning the gear holder
and making sure that the V.R. value is appropriate.
- Turn the Steering Wheel to check V. R. value variations.
9 - 3 GREASING
Apply greasing to gear portions once every 3 months.
