By operating the switch unit, periodically perform the tests
and data check. When installing the machine initially or collecting
cash, or when the machine does not function correctly, perform
checking in accordance with the explanations given in this section.
The following shows tests and modes that should be utilized as
applicable.
IMPORTANT!
In the case where multiple units are linked for communication
play, exiting from the test mode causes the unit to perform the
network check automatically.
During this time, all of the linked units will not allow the game
to be played in normal status. Therefore, be sure not to enter
the test mode if any one of the units is in play. On the other
hand, if even one unit is in the test mode, make sure that other
machines are not in play.
TABLE 8: EXPLANATION OF TEST MODE
| ITEMS | DESCRIPTION |
REFERENCE SECTIONS |
|---|---|---|
| INSTALLATION OF MACHINE | When the machine is installed, perform the following: | |
| 1. Check to see that each setting is as per standard setting made at the time of shipment. | 8 - 9, 8 - 10 | |
| 2. In the INPUT TEST mode, check each SW and VR. | 8 - 5 | |
| 3. In the OUTPUT TEST mode, check each of lamps. | 8 - 6 | |
| 4. In the SELF-TEST mode, check ICs on the IC Board. | 8 - 3 | |
| MEMORY | Choose MEMORY TEST in the MENU mode to allow the MEMORY test to be performed. In this test, PROGRAM RAMs, ROMs, and ICs on the IC Board are checked. | 8 - 2 |
| PERIODIC SERVICING | Periodically perform the following: | |
| 1. MEMORY TEST | 8 - 3 | |
| 2. Ascertain each setting. | 8 - 9, 8 - 10 | |
| 3. In the INPUT TEST mode, test the CONTROL device. | 8 - 5 | |
| 4. In the OUTPUT TEST mode, check each of lamps. | 8 - 6 | |
| CONTROL SYSTEM | 1. In the INPUT TEST mode, check each SW and VR. | 8 - 5 |
| 2. Adjust or replace each SW and VR. | 9, 10, 11 | |
| 3. If the problem can not be solved yet, check the CONTROL's moves. | ||
| MONITOR | In the MONITOR ADJUSTMENT mode, check to see if the PROJECTOR adjustment is appropriately made. | 8 - 8, 13 |
| IC BOARD | 1. MEMORY TEST | 8 - 3 |
| 2. In the SOUND TEST mode, check the sound related ROMs. | 8 - 7 | |
| DATA CHECK | Check such data as game play time and histogram to adjust the difficulty level, etc.. | 8 - 12 |