---

[Table of Contents] [Previous Page] [Next Page]

---

2. SECURING IN PLACE (LEG ADJUSTER ADJUSTMENT)

CAUTION! Make sure that all of the leg adjusters are in contact with the floor. If they are not, the cabinet may move causing an accident.

This machine has 8 casters (four each for the front cabinet, the rear cabinet) and 6 leg adjusters (4 for the front cabinet, 2 for the rear cabinet) (Fig. 6.2a). When the installation position is determined, cause the leg adjusters to come into contact with the floor directly, make adjustments in a manner so that the casters will be raised approximately 5mm. from the floor and make sure that the machine position is level.

1. Move the machine to the installation position. When installing the machine against or close to a wall, be sure to secure a passage space to enable the player to take a ride in the machine.
   
   
2. Cause all of the leg adjusters to make contact with the floor. By using a wrench, make adjustments in the height of the leg adjusters to ensure that the machine's position is level.
   
   
3. After making adjustments, fasten the leg adjuster nut upward and secure the height of the leg adjuster (Fig. 6.2b).