[Previous page][Next page][Table of Contents]
[4]. POWER SUPPLY
Ensure that the power cord is not exposed on the surface (passage, etc.). If exposed, they can be caught and are susceptible to damage. If damaged, the cord can cause an electric shock or short circuit. Ensure that the wiring position is not in the customer's passage way or the wiring has protective covering.
Ensure that the Main SW is OFF.
The AC unit is mounted on the left side of Front Cabinet DX. The AC Unit incorporates the Main SW, Earth Terminal and Inlet.
Firmly insert the Power Plug into the Socket Outlet and the other side of the plug to the Inlet. Turn the Main SW ON to turn power ON.
During initialization setting, do not touch machine. Wait until the initialization settings are finished automatically. Touching the machine during setting can cause inaccurate settings and game play may not be satisfactory.
Turning the AC Unit's main switch to ON will cause the machine to start the power check and network check automatically. In the Power On Check, the steering wheel turns left and right and then returns to the centering position and stops.
In this check, the value of each VR inside the control panel is corrected.
Until this check is completed, and the steering wheel stops, do not touch the steering wheel or play the game. If you do, the steering reaction during the game (reaction at the time of course-out crash) can not be obtained correctly. In the case of an abnormal reaction during the game, turn power on again from the beginning and complete the power on check.
During Network checking. "NETWORK CHECKING" flashes on the screen. When network checking is finished, the demo mode will appear on the monitor screen. After 10 seconds, if the network check is not finished, check the communication connections.
