[Previous page][Next page][Table of Contents]

[3]. SECURING IN PLACE (ADJUSTER ADJUSTMENT)

 

 

Be sure to have all the Adjusters make contact witht eh surface. Unless the Adjusters come into contact with the surface

This machine has 4 casters and 4 adjusters. When installation position is determined, cause the adjusters to come into contact with the floor directly, make adjustments in a manner so that the casters will be raised approximately 5mm. from the floor and make sure that the machine position is level.

Move the machine to the installation position.

Cause all of the leg adjusters to make contact with the floor. By using a wrench, make adjustments in the height of the leg adjusters to ensure that the machine's position is level.

After making adjustments, fasten the leg adjuster nut upward and secure the height of the leg adjuster.This machine has 12 each of adjusters and 8 casters.

When the installation position is determined, cause the adjusters to come into contact with the floor directly, make adjustments in a manner so that the casters will be raised approximately 5mm. from the floor and make sure that the machine position is level.

Be sure to have all the Adjusters make contact with the surface. Unless the Adjusters come into contact with the surface, the Cabinet can move of itself, causing an accident.