Explanation of Test and Data Display

[Previous page][Next page][Table of Contents]

7. EXPLANATION OF TEST AND DATA DISPLAY

By operating the switch unit, periodically perform tests and data check. When installing the machine initially or collecting cash, or when the machine does not function correctly, perform checking in accordance with the explanations given in this section. The following shows tests and modes that should be utilized as applicable.

CAUTIONS TO BE HEEDED WHEN USING TEST MODE:

In the case where multiple units are linked for communication play, exiting from the test mode causes the unit to perform the network check automatically. During this time, all of the linked units will not allow the game to be played in normal status. Therefore, be sure not to enter the test mode if any one of the units is in play. on the other hand, if even one unit is in the test mode, make sure that other machines are not in play. In this product, the power-on check is performed when the Test Mode is exited, as when turning power on. Do not touch the Steering Wheel unitl it stops automatically. touching before it stops may not allow for saticfactory reaction of Steering Wheel during game play.

ITEMS

DESCRIPTION

SECTIONS

INSTALLATION OF MACHINE

When the machine is installed, perform the following:

1.> Check to see that each setting is as per standard setting made at time of shipment.

2.> In the INPUT TEST mode, check each SW and VR.

3.> In the OUTPUT TEST mode, check each of the lamps.

4.> In the MEMORY TEST mode, check the IC's on the IC Board.

7 - 9, 7- 10

7 - 5

7 - 6

7 - 3, 7 - 4

MEMORY
Choose MEMORY TEST in the MENU MODE to allow the MEMORY TEST to be performed. In this test, PROGRAM RAM's, ROM's, and IC's on the IC Board are checked.
7 - 3, 7 - 4

PERIODIC SERVICING

Periodically perform the following:

1.> MEMORY TEST.

2.> Ascertain each setting.

3.> In the INPUT TEST mode, test the control device.

4.> In the OUTPUT TEST mode, check each of the lamps.

7 - 3, 7 - 4

7 - 9, 7 - 10

7 - 5

7 - 6

CONTROL SYSTEM

1.> In the INPUT TEST mode, check each SW and VR.

2.> Adjust or replace VR and SW.

3.> If the problem can not be solved yet, check the CONTROL's moves.

7 - 5

8

8

PROJECTOR
In the PROJECTOR ADJUSTMENT mode, check to see if the PROJECTOR adjustment is appropriately made.
7 - 8

IC BOARD

1.> MEMORY TEST.

2.> In the SOUND TEST mode, check the sound related ROM's.

7 - 7

DATA CHECK
Check such data as game play time and histogram to adjust the difficulty level, etc.
7 - 12

ITEMS	DESCRIPTION	SECTIONS
INSTALLATION OF MACHINE	When the machine is installed, perform the following: 1.> Check to see that each setting is as per standard setting made at time of shipment. 2.> In the INPUT TEST mode, check each SW and VR. 3.> In the OUTPUT TEST mode, check each of the lamps. 4.> In the MEMORY TEST mode, check the IC's on the IC Board.	7 - 9, 7- 10 7 - 5 7 - 6 7 - 3, 7 - 4
MEMORY	Choose MEMORY TEST in the MENU MODE to allow the MEMORY TEST to be performed. In this test, PROGRAM RAM's, ROM's, and IC's on the IC Board are checked.	7 - 3, 7 - 4
PERIODIC SERVICING	Periodically perform the following: 1.> MEMORY TEST. 2.> Ascertain each setting. 3.> In the INPUT TEST mode, test the control device. 4.> In the OUTPUT TEST mode, check each of the lamps.	7 - 3, 7 - 4 7 - 9, 7 - 10 7 - 5 7 - 6
CONTROL SYSTEM	1.> In the INPUT TEST mode, check each SW and VR. 2.> Adjust or replace VR and SW. 3.> If the problem can not be solved yet, check the CONTROL's moves.	7 - 5 8 8
PROJECTOR	In the PROJECTOR ADJUSTMENT mode, check to see if the PROJECTOR adjustment is appropriately made.	7 - 8
IC BOARD	1.> MEMORY TEST. 2.> In the SOUND TEST mode, check the sound related ROM's.	7 - 7
DATA CHECK	Check such data as game play time and histogram to adjust the difficulty level, etc.	7 - 12