(3) SECURING TO THE INSTALLATION POSITION (LEG ADJUSTER ADJUSTMENT)
WARNING!
Make sure that all of the leg adjusters are in contact with
the floor. If they are not, the cabinet may move and cause an
accident to occur.
This machine has eight casters and eight leg adjusters (Fig 6.6).
When the installation position is determined, cause the leg adjusters
to come into contact with the floor directly, make adjustments
in a manner so that the casters will be raised approximately 5
mm. from the floor and make sure that the machine position is
level.
- Move the machine to the installation position. When installing
the machine against or close to a wall, be sure to secure a passage
space to enable the player to take a ride in the machine.
- Attach the joint plate for the 2 internal leg adjusters shown.
First, cause the other 6 leg adjusters to come into contact with
the floor. Make leg adjuster adjustments with a wrench in a manner
to ensure the machine's position is level (Fig. 6.6).
- After making adjustments, fasten the leg adjuster nut upward
and secure the height of the leg adjuster (Fig. 6.7).
- Insert the notch portions of the joint plate to the 2 leg
adjusters.
- Lower the leg adjuster and fasten the nut upward. Secure
the joint plate with the nuts and the bottoms of the leg adjuster
(Fig. 6.8).
