[Table of Contents] [Previous Page] [Next Page]

6. PRECAUTIONS TO BE HEEDED WHEN ASSEMBLING AND MOVING THE MACHINE

WARNING:
  1. Perform the assembly work by following the procedure herein stated. Failing to comply with the instructions, for example, inserting the plug into an outlet at the stage not mentioned in this manual might cause an electric shock accident.

  2. Assembling should be performed as per this manual. Since this is a complex machine, erroneous assembling may cause damage to the machine, or malfunctioning to occur.

  3. When assembling, be sure to perform the work by plural persons.


When carrying out the assembly work, follow the procedure in the following sequence:

ASSEMBLING THE COCKPIT

INSTALLING THE BILLBOARD

SECURING IN PLACE (LEG ADJUSTER ADJUSTMENT)

INSTALLING THE AC COVERS (WIRING CONNECTION)

POWER SUPPLY, AND EARTH CONNECTION

TURNING THE POWER ON

ASSEMBLING CHECK

Note that the master key and the cashbox door key (accessories) in addition to the tools such as a plus screwdriver, wrench for M16 hexagon bolt and socket wrench are required for the assembly work.


CAUTION:
Perform the tightening of hexagon bolts described above after adjusting the leg adjusters. Make sure that until the leg adjuster adjustments are made, keep the hexagon bolts tightened temporarily.