3 - 4 INPUT TEST
Selecting INPUT TEST displays the following on the screen andenables you to check the status of each switch and each Volumevalue of the cabinet. On this screen, periodically check the statusof each switch & V.R.
By pressing each switch, if the display on the right-hand sideof the name of each switch changes to ON from OFF, the SW andthe wiring connections are satisfactory.
To check the Coin SW of "CHUTE #X", open the CoinChute Door and insert a coin into the Coin Inlet.
B TEST and B SERVICE are on the Game Board. Nommally, theyare not used.
Simultaneously pressing the Service button and the Test buttonretums the Test Menu on the screen.
The reference values for adjusting each Volume are as follows.When the Steering Wheel and the Pedal are operated, if the correspondingVolume value varies in a natural manner within the following range,it is satisfactory.
HANDLE : 80H+2 (Centering Position)
ACCEL : When the Pedal is released -- When thePedal is stepped on.
BRAKE : Under 30 H Over COH
If the Volume value is not within the above range, movementsare not satisfactory. By referring to the Owner's Manual, adjustor replace the Volume.