[Table of Contents] [Previous Page] [Next Page]

1. GENERAL PRECAUTIONS

 

  • Follow Instructions: All operating and use instructions should be followed.

  • Attachments: Do not use attachments not recommended by the product manufacturer as they may cause hazards.

  • Accessories: Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer's instructions, and should use only mounting accessories recommended by the manufacturer.

  • Moving the Product: This product should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product to overturn.

  • Ventilation: Slots and openings in the cabinet are provided for ventilation, to ensure reliable operation of the product and to protect it from overheating; these openings must not be blocked or covered. The openings should never be blocked by placing the product in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to.

  • Power Sources: This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your location, consult your local power company. For products intended to operate from battery power or other sources, refer to the operating instructions.

  • Grounding or Polarization: This product is equipped with a three-wire grounding-type plug, a plug having a third (grounding) pin. This plug will only fit into a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding-type plug.

  • Power Cord Protection: Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product.

  • Overloading: Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.

  • Object and Liquid Entry: Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.

  • Servicing: Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

  • Damage Requiring Service: Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:
    a) If the power cord or plug is damaged;
    b) If liquid has been spilled, or objects have fallen into the product;
    c) If the product has been exposed to rain or water;
    d) If the product does not operate normally when following the operating instructions. Adjust only those controls that are explained in the operating instructions. An improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation;
    e) If the product has been dropped or damaged in any way;
    f) When the product exhibits a distinct change in performance; this indicates a need for service.

  • Replacement Parts: When replacement parts are required, be sure the service technician has used replacements parts specified by the manufacturer or that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.

  • Safety Check: Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.

  • Heat: The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

  • Cleaning: When cleaning the monitor glass, use water or glass cleaner and a soft cloth. Do not apply chemicals such as benzine, thinner, etc.

  • Location: This an indoor game machine, DO NOT install it outside. To ensure proper usage, avoid installing indoors in the places mentioned below:
    · Places subject to rain/water leakage, or condensation due to humidity;
    · In close proximity to a potential wet area;
    · Locations receiving direct sunlight;
    · Places close to heating units or hot air;
    · In the vicinity of highly inflammable/volatile chemicals or hazardous matter;
    · On sloped surfaces;
    · In the vicinity of emergency response facilities such as fire exits and fire extinguishers;
    · Places subject to any type of violent impact;
    · Dusty places.

     

    Installation Precautions

    · Verify the amperage of the branch circuit outlet before plugging in the power plug. Do not overload the circuit.
    · Avoid using an extension cord. If one is required, use an extension cord of type SJT, 16/3 AWG rated min. 120 VAC, 7A.
    · Moving this unit requires a minimum clearance (of doors, etc.) of 32" (W) by 77" (H).
    · For the operation of this machine, secure a minimum area of 32" (W) by 42"(D).

     

    Regulatory Approvals

    This game has been tested and found to comply with the Federal Communications Commission Rules.

    This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

    This game has been tested and listed by Underwriters Laboratories, Inc., to ANSI/UL22.

  • The maximum electrical current allowed is max. 11.72 A (AC120V 60Hz)

  • Note that for transporting the machine into the location building, the minimum necessary dimensions of the door openings are 4.5 feet wide by 4 feet high.

  • For the safe operation of the machine, secure a minimum area of 5.25 feet wide and 11.15 feet deep.

  • Provide sufficient space so as to allow the product's ventilation fan to function properly. To avoid machine malfunctioning, do not turn off power to the fan, and do not place obstacles near the ventilation opening.