BIKE MECHANISM
VOLUME VR REPLACEMENT
- Replace the bike's bank angle VR in the following procedure.
- Take out the 4 hexagon socket bolts to remove the fuel cap.
- Take out a total of 3 bolts which secure the tank, and remove
the tank.
- Take out the 2 screws and remove the wire clamp.
- Take out the 4 screws and remove the volume VR cover.
- Take out the 2 screws and connector to replace the VR.
- After VR replacement, make adjustments of gear mesh so that
when the bike is banked, the VR shaft does not rotate beyond
the shaft's predetermined rotation range.
- After the adjustment is finished, install tank and fuel cap.
- After assembly, perform VR setting in the test mode.
Continued on next page.