|
ITEMS |
DESCRIPTION |
|---|---|
| INSTALLATION | When the machine is installed, perform the following: |
| OF MACHINE | 1. Check to see that each setting is per standard setting made at |
| the time of shipment. | |
| 2. In the INPUT test mode, check each SW and VR. | |
| 3. In the OUTPUT test mode, check each one of the lamps. | |
| 4. In the SELF-TEST mode, check IC's on the IC board. | |
| MEMORY | Choose MEMORY test in the MENU mode to allow the memory |
| test to be performed. In this test, PROGRAM RAMs, ROMs and | |
| ICs on the IC board are checked. | |
| PERIODIC | Periodically perform the following: |
| SERVICING | 1. MEMORY test. |
| 2. Ascertain each setting. | |
| 3. In the INPUT test mode, test the control device. | |
| 4. In the OUTPUT test mode, check each of the lamps. | |
| CONTROL | 1. In the INPUT test mode, check each SW and VR. |
| SYSTEM | 2. Adjust or replace each SW and VR. |
| 3. If the problem cannot be solved, check the control | |
| movements. | |
| MONITOR | In the monitor adjustment mode, check to see if the projector |
| adjustment is appropriately made. | |
| IC BOARD | 1. Run the MEMORY test. |
| 2. In the SOUND test mode, check the sound related ROMs. | |
| DATA CHECK | Check such data as the game play time and histogram to adjust the |
| difficulty level, etc. |