ASSEMBLING THE MACHINE
UNCRATE PTV CABINET
- Move the PTV shipping crate into a location near the final
installation location while still on the pallet.
- Carefully remove the shipping bands, and top and sides of
crate.
- The PTV cabinet weighs 440 lbs. With four (4) people each
holding one side hand hold, and supporting the back edge of the
PTV cabinet with their other hand, lift the PTV cabinet off the
crate bottom and shipping pallet.
- Lower the the PTV cabinet gently to the floor and roll to
its approximate installed location.
- The remote control is taped to the back of the PTV cabinet,
in a plastic bag with its batteries. Remove this bag and store
on the floor inside the PTV access panel. The remote control
is used only to readjust the PTV's convergence.
CAUTION!
The PTV cabinet weighs 440 lbs and is unstable during uncrating.
Do not attempt to push cabinet from front or back.
Avoid bumping and tipping. Use at least 4 people to uncrate.
The PTV cabinet is very heavy and can cause serious injury if
it falls on you.
