[Table of Contents] [Previous Page] [Next Page]

 

POWER ON
  1. Plug the AC cord going from the rear of the left-side cabinet into a dedicated outlet.
  2. Toggle the Main AC Switch, located at the lower center rear of the game cabinet. This will cause the machine to power up and run a Power On Check.
  3. During the Power On Check, the steering wheel will turn left and right, then returns to the centered position (see Figure 13), allowing the control parameter values to be corrected (on the game board). Do not touch the steering wheel or other controls while the Power On Check is in progress or the steering wheel reaction during the game will be incorrect.
  4. After the Power On Check is complete, the machine runs a Network Check to initiate communication with other linked machines. During this check, the Network Check screen appears (see Figure 14). The Network Check should take approximately 10 seconds. If it does not complete in 10 seconds, check the fiber optic cable connections (see the Machine Options: Linking section).