9. CONTROL PANEL
CAUTION!
- This unit is a heavy item weighing approximately 21 kg.;
therefore, be very careful when performing the work.
- Immediately after the game is finished, the motor may still
be very hot. When performing the removal work, wait until the
motor cools off.
On the Test mode, if the Steering Wheel's V. R. variations
are not within the allowable range, the V. R. installation position
adjustments or V. R. replacement are needed. Also, be sure to
apply greasing to the V.R. Gear portion once every 3 months.
9 -1 REMOVING THE CONTROL PANEL
- Remove a total of 6 Tamperproof Screws from the upper and
lower parts of the Control Panel. At this time, be sure to firmly
hold the Control Panel so as not to drop it.
- Carefully draw the Control Panel from the Front Cabinet.
At this time, pulling out the Control Panel completely may cause
wiring breakage, therefore, be sure to draw it halfway and not
completely.
- Disconnect all of the Connectors connected to the Front Cabinet.
- Pull out the Control Panel completely. When putting it down,
be very careful so as not to damage the V. R. portion of the
motor's rear end.
