WARNING!
Make sure that all the leg adjusters are in contact with the
floor. If they are not, the cabinet can move, causing an accident.
This machine has 8 casters and 6 leg adjusters. When the installation
position has been determined, cause the leg adjusters to come
into contact with the floor, and make adjustments so that the
casters are raised approximately 5mm from the floor. Ensure that
the machine is level.
Move the machine to the installation position.
Cause all of the leg adjusters to make contact with the floor.
By using a wrench, make adjustments in the height of the leg adjusters
to ensure that the machine is level.
After making adjustments, fasten the leg adjuster nut upwards
to secure the height of the leg adjuster.