INPUT TEST
When Input Test is selected, the monitor will show the following,
allowing you to watch the status of each switch. On this screen,
periodically check the status of each switch.
· By pressing each switch, if the display on the
right-hand side of the name of each switch changes to ON from
OFF, the switch and the wiring connections are satisfactory. When
the Controller (Lever) is operated in the direction of the arrow,
the right-hand side indication of the Switch name becomes ON.
· To check Coin Chute #1 and Coin Chute #2 Coin
Switches, open the Coin Chute Door and insert coin(s) into the
slot.
· To return to the Menu mode, press the Test button.
