Selecting the GAME SYSTEM (See Fig. 11) in the menu mode causes the present game settings to be displayed and allows setting changes to be made. Each GAME SYSTEM setting is explained below.
LINK ID: Standard setting is "SINGLE". For linked units, set one to "MASTER" and the rest of the seats to "SLAVE". The game setting and coin setting, etc. of the MASTER seat apply to all SLAVE seats. Changes made to SLAVE seats are not effective.
CAR NUMBER: For linked play between 2 or more machines, the machines are numbered in sequential order: No. 1, No. 2, No. 3, ... No. 8. Numbering is done starting from the left, facing the monitor screen. If the same number is used for 2 or more cabinets or if cabinets are numbered in an incorrect sequence, the on-screen display may be confused.
CABINET: Setting of cabinet type. Set to "STAND ALONE" for this machine.
COUNTRY: Message language. Choices are "USA", "EXPORT", and "JPN".
DIFFICULTY: The game difficulty is classified into 4 different categories from "EASY" to "HARDEST". The standard setting is "NORMAL".
ADVERTISE SND: Set to "OFF" to have machine silent during standby. Standard setting is "OFF."
GAME MODE: Selection of lap count ranges for BEGINNER, ADVANCED, and EXPERT courses. Allows lap count to be changed for specific attraction event purposes. Ranges are: "NORMAL" (8, 4, 2 laps), "GRAND PRIX" (20, 10, 5 laps), and "ENDURANCE" (80, 40, 20 laps).
SETTING CHANGE PROCEDURE
1. Press the SERVICE switch or VR1 (red) OR VR2 (green) to move the arrow (>>) to the desired item.
2. Choose the desired setting change item by using one of: VR2 (blue), VR3 (yellow), the TEST switch, or the START button.
3. To return to the MENU mode, move the arrow to EXIT and press the TEST switch or the START button.