1. HANDLING PRECAUTIONS
When installing or inspecting the machine, be very careful
of the following points and pay attention to ensure that the player
can enjoy the game safely.
- Be sure to turn the power off before working on the machine.
- To insert or pull out the plug quickly is dangerous.
- It is necessary to make sure that the power cord or the grounding
wire is not exposed on the road, etc. in a manner so as to be
dangerous. Make sure that grounding connections are made safely
at the position where so specified.
- Do not use any fuse that does not meet specified rating.
- Make complete connections for the IC board and other connectors.
Insufficient insertion is very dangerous.
- The operating (ambient) temperature range is from 5°C
to 40°C.
- When cleaning the CRT surfaces, use a soft, dry cloth. Do
not apply chemicals such as thinner, benzene, etc.
Also, for the IC board circuit inspections, only the logic
tester is allowed. The use of a tester is not permitted, so be
careful in this regard.
After confirming that there are no irregularities, turn the power
ON.
- CONCERNING THE PROJECTION DISPLAY:
- A PROJECTION DISPLAY is used for this machine. The PROJECTION
DISPLAY's screen is susceptible to damage and therefore, when
cleaning it, pay careful attention. For details, refer to Section
13.
- CONCERNING COMMUNICATION PLAY:
- Herein stated is an independent use of the machine. This
game, when linked with other units, allows multiple persons to
enjoy "communication play" simultaneously. For communication
play, refer to Communication Manual.